We use cookies and analytics to understand how the site is used and to improve your experience. You can accept or decline.
The BambuLab P1S has a sealed enclosure but limited active heating. Cold air still causes warping and layer separation with ABS, PA, and PC at higher chamber temperatures. iHeater Kit 200W fills that gap — steady warmth throughout the chamber, layers bond the way they should. Connect via USB (Klipper) or Wi-Fi through iHeater-Link. Works with BambuLab via Wi-Fi and Klipper via USB or Wi-Fi. Trigger mode activates automatically with the heated bed. Two firmware options: Standalone (buttons + LED, no PC needed) or Klipper integration via USB.
iHeater Kit is a DIY bundle for assembling an active heated chamber system for a 3D printer. It helps maintain stable temperature inside a closed enclosure when printing engineering plastics: ABS, ASA, PA, PC and other materials sensitive to print conditions. The bundle can work with Klipper, Bambu Lab, autonomous firmware, and can be controlled through an app or web portal.
When printing engineering plastics, not only nozzle and bed temperature matter. If the chamber stays cold or the temperature inside the printer is unstable, the part can layer separate, deform, lift off the bed or lose strength between layers. Active chamber heating helps create more stable conditions for printing ABS, ASA, PA, PC and other materials that need a warm enclosed environment.
Assemble iHeater Kit and install it inside the closed enclosure of your 3D printer according to the instructions.
Use iHeater with Klipper, Bambu Lab, standalone firmware, app or web portal.
The system helps maintain chamber temperature and creates more stable conditions for engineering plastics.
Helps maintain the necessary conditions inside a closed enclosure for printing.
Reduces the risk of layer separation, lifting and issues with large parts.
Suitable for ABS, ASA, PA, PC and other materials that need a warm chamber.
Works with Klipper, Bambu Lab, autonomous firmware, app and web portal.
Control board, temperature sensors and connectors for connecting main system components.
Heating element and fan create a stream of warm air inside the chamber.
Fasteners and assembly elements are included in the kit. Printed housing parts are not included.
Helps create a warm environment for printing parts without deformation and liftoff, ensures best layer adhesion.
Suitable for materials where stable print conditions inside the chamber are important. Allows printing PA and PC to get parts of the required quality.
Used in printers with enclosure or self-made closed chamber.
Assembly, connection, flashing and setup instructions.
Klipper support, standalone mode and future project updates.
Forum, Discord and Telegram for questions, user experience and installation examples.
The project is maintained by the author: documentation improves, updates come out and new materials appear for the community.
Suitable for closed FDM printers or printers with a self-made chamber. Important that there's space inside for safe installation.
Yes. The kit can work autonomously and can also be controlled through an app or web portal.
Control is done through autonomous firmware, mqtt connection with the printer, app or iDryer web portal.
All necessary components for assembling an active chamber heating system. Printed housing parts are not included.
It's a DIY kit for self-assembly. There's documentation and community support for installation.
Choose 110V or 220V for your electrical network voltage and region. If in doubt — better check before ordering.
Parameter | Value |
|---|---|
Product type | DIY kit |
Purpose | active heating of 3D printer chamber |
Heater power | 200W |
Power versions | 110V / 220V |
Control | Klipper / Bambu Lab / standalone / app / web portal |
Printer type | closed FDM printers |
Supported materials | ABS, ASA, PA, PC and other engineering plastics |
Sensors | air temperature and heater temperature |
Assembly | self-assembly |
Printed parts | not included in the kit |
iHeater Kit is suitable for those who print with materials that need stable temperature inside a closed chamber.
For preliminary iHeater effectiveness calculation use the calculator
iHeater Kit was created not as a simple heater, but as a controlled system for active 3D printer chamber heating.
Criterion | Ordinary heater | iHeater Kit |
|---|---|---|
Temperature control | often manual | automatic control |
Sensors | usually none | air + heater |
Integration | no connection with printer | Klipper / Bambu Lab / app / portal |
Safety | depends on assembly | heating control and firmware |
Support | on your own | documentation and community |
After purchase, you're not left alone with the kit: iHeater Kit has documentation, firmware, instructions and community support.
Before purchasing, make sure that this information is sufficient for assembly, flashing and launching the device.
iHeater Kit uses multiple protection levels: board fuse, thermal cutoff and firmware temperature control. This helps shut off heating in case of malfunction.